TyreSize.in

Hyundai Verna Tyre Size

Mukesh Kumar

Automotive content lead, 8 years covering Indian car specs

Verified against OEM Data (2026-09-02)
Official OEM Link

Factory OEM Tyre Size / मूल टायर साइज

185/65 R15 / 205/55 R16

OEM Verified Documentation

Verna Brochure

View Official Source Document

Complete Tyre & Wheel Specifications

SpecificationOfficial Manufacturer Specification
Factory OEM Tyre Sizes
185/65 R15(88H)EX / S
205/55 R16(91V)SX / SX(O) / Turbo
Trim / Variant ApplicationEX/S: 185/65 R15; SX/SX(O)/Turbo: 205/55 R16
Alternative / Other Factory Sizes185/65 R15, 215/50 R17
Rim Diameter (रिम का आकार)15 / 16 inch
Load Index88 (15") / 91 (16")
Speed RatingH (210 km/h) / V (240 km/h)
Tyre Pressure / हवा का दबाव (Standard)Front (आगे): 33 psi (Placard) · Rear (पीछे): 33 psi (Placard)
Manufacturer Source:Verna BrochureOfficial PDF
Trim coverage: EX/S: 185/65 R15; SX/SX(O)/Turbo: 205/55 R16Inflation note: Exact current pressure not directly established in brochure; refer to driver door jamb placard
Open Official OEM Doc

What This Size Means

185 = tread width in millimetres. 65 = aspect ratio, meaning the sidewall height is 65% of the tread width (120 mm). R = radial construction (or bias-ply if dash-indicated). 15 = wheel rim diameter in inches (381 mm).

Editor's Technical Insight

The new-generation Hyundai Verna represents a major leap forward in both footprint and powertrain performance, boasting a formidable 1.5L Turbo GDi petrol engine producing 160 PS and 253 Nm of torque. With this substantial performance potential, the factory 205/55 R16 tyres play a paramount role in putting power down without wheel slip. On SX and SX(O) variants, the 205mm wide tread provides confidence under hard braking from triple-digit expressway speeds, while the 'V' speed rating (certified up to 240 km/h) ensures high thermal stability on long runs. However, the relatively low 55% aspect ratio yields a 113mm sidewall, which requires drivers to exercise caution around sharp road cuts and railway crossings to avoid rim pinching. Owners running the 1.5L Turbo model who enjoy spirited highway driving frequently upgrade from factory MRF rubber to Continental UC6 or Michelin Primacy 4, which dramatically improves wet braking bite and suppresses high-speed cabin tyre resonance.

Tyre Options Available in India

Verified replacement options compatible with Hyundai Verna stock wheel rims:

Continental

UltraContact UC6

Estimated price:₹7,200–8,100
Yokohama

BlueEarth-GT AE51

Estimated price:₹6,800–7,700
Apollo

Alnac 4G

Estimated price:₹5,900–6,700

Try It: Compare Upgrade Sizes

Calculate rolling diameter deviation, ground clearance difference, and speedometer error before upsizing.

OEM size is pre-filled. Enter your desired upgrade size to compare.

Frequently Asked Questions

Can I upsize my Verna tyres to 215/50 R17?
Yes — 215/50 R17 is a popular enthusiast upsize that fits within the wheel wells without fouling the fenders. It increases high-speed stability and visual stance, though the thinner 108mm sidewall makes the low-speed urban ride somewhat stiffer.
What tyre pressure is recommended for high-speed highway touring in the Verna?
Hyundai recommends a standard 33 psi cold pressure front and rear. For sustained speeds on expressways like Samruddhi Mahamarg or Delhi-Mumbai Expressway with a fully loaded cabin, setting 35 psi minimizes tyre sidewall heat generation.
Do base variants of the Verna come with 15-inch tyres?
Yes, entry-level EX and S variants ship with 185/65 R15 tyres on steel rims. Upgrading these trims to the higher SX specification of 205/55 R16 is a direct plug-and-play swap with 16-inch alloy wheels.
What is the speed rating required for replacement tyres on the Verna 1.5 Turbo?
Always choose replacement tyres with at least a 'V' (240 km/h) or 'H' (210 km/h) speed rating to safely match the high top-speed potential and rapid acceleration of the 160 PS turbocharged powertrain.